This adapter fits the exit port to almost all Epson Inkjet cartridges allowing you to draw or pull ink through the cartridge or a CIS system to purge it.

It is particularly useful for use with any CIS systems where:

• a new/fresh ink supply is ready to replace an old one
• pigment concentrations in the cartridges are causing clogs (where pigment ink is being used)
• ink foam build up in the cartridge is causing ink starvation issues

Simply fit this adapter to a standard Luer syringe, plug it into the cartridge exit/feed port (on the bottom of the cartridge) and draw the ink through.

Product Specification

• Fitting Type: Female Luer
  
• Thread Type: FULL
  
• Compability: Any Epson desktop inkjet printer cartridge or compatible CIS system
• Material: PolyCarbonate

Note:
The adapter is notched at the end to allow ink to flow in from the sides and avoid the end being blocked by the flat surface of the valve inside the cartridge or cartridge wall.

Notes:
- All brand names and trademarks are the property of their respective holders and are used for reference only
- These inks are not manufactured for, nor supplied or distributed by Epson.
- Use of these or any other third party inks may void your printer warranty