The folk at REdSETTER have been working hard to catch up with the new printers and we're now able to offer the unit for the North American Canon PGI-270, CLI-271 cartridge chips.

Key Features

• USB power cable now uses standard USB port (as per your printer)
  
• A power cable is included with the unit
• The cartridge slots in horizontally rather than at an angle. As a result. any ink leakage caused by cartridge handling is less likely to ingress into the units electronics.
• This unit will reset the equivalent of 30 x 5 cartridges or 25 x 6 cartridges (ie: 150 resets) (See below).
• Trade-in discount available for expired units

Specification:

• Compatible with:
  • PGI-270BK
  • CLI-271 C/M/Y/BK/GY
• Reset Limit: 150
• Power: USB A/B type (Cable is included)

Instructions for Use:

1. Plug the unit cable into the REdSETTER and an available USB socket (for power)
   Tip: Your printers front Pictbridge socket can power this unit too (when the printer is switched on)
   
2. Slot it into the guiding grooves so that the pins make contact with your cartridge chip
3. Wait for a single short red LED blip followed by a longer LED burst
4. That's it...

The REdSETTERs also come with a removeable guide which allows you to slide CLI-271 cartridges into place or just remove it to reset the larger PGI-270 cartridge instead.

Power is provided via a standard A/B type USB cable (provided).

Notes:

• Compatible USB powered chip resetters are also available for European model 570/571 chips/cartridges.