If you own a Workforce Pro printer you may find your printer has a replaceable maintenance box. These are waste ink collectors which contain absorbent padding and are equipped with a chip to record the ink levels anticipated in the pads.

Once full, the maintenance box normally needs replacing with either an Epson original part or you can use a compatible unit from OctoInkjet at considerably lower cost.

The T6710/T6711 chip resetter takes this a stage further by allowing you to reset your maintenance box chip (before it reaches 85% full or higher) and then re-use the box (with your own replacement absorbent padding/material).

This listing, for the chip resetter, is more suited to customers who generate a particularly high amount of waste ink, or who simply want to minimise the plastic waste (and who have identified their own solution to absorbing the waste ink).

Using the chip resetter:

Instructions available in this guide

Specification:

• 1x Chip resetter
• Compatible with:
  • T6710 maintenance box chip
    
  • Epson original/OEM
  • Compatible single use units
    
    
  • T6711 maintenance box chip
    • Epson original/OEM
    • Compatible single use units
  •  
• Power: Battery
  

Notes:

• Resetter batteries are replaceable and this guide demonstrates the process if such replacement is ever required.