The SquEasyFill Fill Your Own (FYO) refill kit is for anyone who already has their own ink supply (or who purchase their inks in larger bulk quantities) and can't fit a SquEasyFill cap to their own bottles.

The kit has expanded to include a funnel, silicon fill-hole plugs and a greater selection of needle sizes/lengths.

Specification:

• 6x 125ml bottles (empty)
• 6x luer lock SquEasyFill caps
  Usually available as either:
• 1x Black, 2x Red, 2x Blue, 1x Yellow
• 2x Black, 1x Red, 1x Blue, 1x Yellow, 1x Green
  
  
• 6x Blunt needles
  
  • 18g 1.5"/37mm (Recommended for general use)
    or
  • 20g 2"/50mm (Recommended for Canon refilling)
    or
  • 22g/20g/18g in 1.5" and 2" lengths also available
     
• 6x  needle covers (air/liquid tight) to suit needle gauge/size
  
• 6x silicon cartridge plugs (4mm - tapering to 2mm)
• Funnel(s):
  • 1x Large funnel (80mm ID opening, 13mm OD neck)

Notes:

• If you are purchasing OctoInkjet inks the bottles are usually already the SquEasyFill type.
• You would only need the Cap/needle set to convert them to a SquEasyFill kit
• Sharp needles are not sold with the kits and need to be purchased seperately
• The funnel has recently been added to allow easier filling of the bottles with any ink, solvents, etc... you wish to use the kit with.
• Both funnels are suitable for the kit and allow different filling speeds, accuracy and overall bottle stability.
• The silicon plugs offer a replacement plug for the original fill hole ball when using the top-fill method of refilling.

For more information about the "SquEasyFill" kits please visit this page